 |
KF804HM
Fully Automatic Case Former
Designed and engineered for forming 50# almond cases. The model KF804HM is a heavy duty full length model which has its own KD indexing hopper. The hopper is equipped with 2-axis vacuum pick system which is designed to automatically feed KD into the forming section. Also equipped with heavy duty compression powered side belts to ensure glue bonding. Up to 12CPM performance... |
 |
KF403HM
Semi Automatic Case Former
Designed and engineered for versatility, affordability, and reliability. The model KF403HM is a compact model which is built to take minimum space. This model is most suited for almond industry. Up to 15CPM performance. Standard 240Volt/ 3Phase/ 60Hz power with 480Volt as an option. Powder coated finish and zinc plating on all wear surfaces. Chain driven flight bar for reliable.. |
 |
KE300HM
FOL Case Erector
Designed and engineered for erecting and bottom gluing of FOL cases. This model uses hot melt adhesive as a sealing unit. Up to 12 Cases per Minute performance on standard 50# Almond box.. Standard 240Volt/3Phase/60Hz power with 480 Volt as an option. Powder coated finish and zinc plating on all wear surfaces. Fully enclosed safety... |
 |
KV2008
Fully Automatic Load Station
Designed and engineered for indexing open carton beneath scale for loading, then vibrating load and presenting for case sealing. |
 |
K731SBHM
Fully Automatic Hot melt Case Sealer
Designed and engineered for closing and sealing FOL (Full OverLap) cartons containing pliable or rigid products. The machine is equipped with horizontal and vertical crank screw adjust for quick change over. Also equipped with motorized heavy duty side belts for reliable case advance operation.Up to 15 Case per Minute performance. Standard 240 Volt/3Phase/60Hz power with ... |
 |
EC-201
Fuji Robotic
Fully Automatic Palletizer
Klippenstein Corporation is proud to be a Fuji Robotic distributor. We have installed Fuji Robotic palletizers for bag palletizing, case palletizing, and at one location, a single robot that will palletize both bags and cases. We have a programming specialist that was trained at Fuji Yusuki Kogyo Co. headquarters, in Sanyo-Onoda, Yamaguchi ... |
 |
KST2003
Semi Automatic Case Stacker
Designed and engineered for versatility, affordability, and reliability. Up to 15 CPM performance. Standard 240Volt/3Phase/60Hz power with 480Volt as an option. Powder coated finish and zinc plating on all wear surfaces. Hydraulic lift plate for down stacking the cases. Directional flow may be reoriented. |
